Swimming pools should be treated routinely, regardless of wear or not. If you feel the objection to take care of the swimming pool, you should empty the water, because the stagnant water can cause various diseases. Meanwhile, don’t forget to check out the awesome Pool Pump for Above Ground Pools.
Give Algaecide in the morning once a week. This is useful for destroying algae (algae) without damaging pool tiles. This is an attempt to control the contaminants of algae in the pool.
On the surface of the pool water is usually found small metal particles. You can remove these particles by adding special chemicals that are able to remove the metal from the water.
The pH level is the level of acidity (alkalinity) in water. The pH level at the pool should be slightly alkaline, ie 7,2-7,6. Setting the pool water balance is essential so that there is no irritation or skin disorder. The pH level of 7.2 to 7.6 can make chlorine work effectively. You can add muriatic acid or baking soda. You add the ingredients only if the water is too acidic or too alkaline. In addition to damaging the skin, the wrong acid levels can also damage the swimming pool equipment.
Swimming pool sanitation is the process of sterilizing a pool of algae and bacteria that can be destroyed. A dirty swimming pool can potentially be a breeding ground for bacteria. Algae and Bacteria can be removed with chlorine. While bromine is commonly used to sterilize swimming pools. Chlorine is available in tablets, liquids or granules. One swimming pool requires about 1.0-3.0 ppm chlorine. The chlorine level is not constant, so it’s best to add 3-4 times daily chlorine to keep the chlorine amount constant (fixed).
Other dirt such as bird droppings, deciduous leaves, plastic waste and other must be cleaned by using a net. Pool tiles should also be routinely cleaned so that no stain spots.
Low levels of calcium can cause water to become corrosive. This causes calcium checks to be quite important.
Appropriate levels of acidity can prevent sudden changes in pond water pH levels. The standard of acidity is 80-120 ppm if excess can be added baking soda for balancing.